|
Western Digital has launched its WD Scorpio 320 GB 2.5-inch SATA (Serial ATA) hard drives as well as its environmentally friendly, energy-conscious GreenPower family of WD enterprise hard drive products. The The new WD RE2 GreenPower (GP) family offers capacities of 500 gigabytes (GB), 750 GB and one terabyte (TB) while the Scropio is designed for notebook computers and portable storage devices.
The WD RE2-GP hard drives are designed with power savings as the primary attribute. The WD RE2-GP hard drives offer massive capacity with significant power savings and lower total cost of ownership compared to other competitive enterprise-class drives. The Scorpio on the other hand uses advanced head and media technology to achieve the world's highest capacity 2.5-inch, slim, 9.5mm form-factor hard drive and includes proprietary features that make the drive extraordinarily quiet while running at cool operating temperatures.
Read on for more.
WD Scorpio Drives
The WD Scorpio 320 GB hard drives deliver high performance with 3 Gb/s
transfer rate and are destined for use in OEM notebook platforms that
offer the highest storage capacities to the worldwide market. The new WD Scorpio drive further expands the company's breadth of
2.5-inch, 5400 RPM, mobile hard drive offerings to capacity points up
to 320 GB.
| Performance Specifications |
 |
Rotational Speed |
5,400 RPM (nominal) |
 |
Buffer Size |
8 MB |
 |
Average Latency |
4.20 ms (nominal) |
 |
| Seek Times |
 |
Read Seek Time |
12.0 ms |
 |
Track-To-Track Seek Time |
2.0 ms (average) |
 |
| Transfer Rates |
 |
Buffer To Host (Serial ATA) |
3 Gb/s (Max) |
 |
Transfer Rate (Buffer To Disk) |
850 Mbits/s (Max) |
 |
 |
| Physical Specifications |
 |
Formatted Capacity |
320,072 MB |
 |
Capacity |
320 GB |
 |
Interface |
SATA 3 Gb/s |
 |
 |
| Physical Dimensions |
| English |
 |
Height |
0.374 ±0.008 inch |
 |
Length |
3.94 ±0.010 inch |
 |
Width |
2.75 ±0.010 inch |
 |
Weight |
0.26 Pounds |
 |
| Metric |
 |
Height |
9.5 ±0.20 mm |
 |
Length |
100.2 ±0.25 mm |
 |
Width |
69.85 ±0.25 mm |
 |
Weight |
0.117 kg |
 |
 |
| Environmental Specifications |
| Acoustics |
 |
Idle Mode |
24 dBA (average) |
 |
Seek Mode 0 |
26 dBA (average) |
 |
| Temperature (English) |
 |
Operating |
41° F to 140° F |
 |
Non-operating |
-40° F to 149° F |
 |
| Temperature (Metric) |
 |
Operating |
5° C to 60° C |
 |
Non-operating |
-40° C to 65° C |
 |
| Humidity |
 |
Operating |
8-90% RH non-condensing |
 |
Non-operating |
5-95% RH non-condensing |
 |
| Altitude (English) |
 |
Operating |
-1,000 feet to 10,000 feet |
 |
Non-operating |
-1,000 feet to 40,000 feet |
 |
| Altitude (Metric) |
 |
Operating |
-305M to 3,050M |
 |
Non-operating |
-305M to 12,200M |
 |
| Vibration |
 |
Operating |
0.00459 g²/Hz (10 to 500 Hz) |
 |
Non-operating |
0.05102 g²/Hz (10 to 500 Hz) |
 |
 |
| Electrical Specifications |
| Current Requirements |
 |
5 VDC |
 |
Read/Write |
500 mA |
 |
Idle |
400 mA |
 |
Standby |
50 mA |
 |
Sleep |
20 mA |
 |
 |
Power Dissipation |
 |
Read/Write |
2.50 Watts |
 |
Idle |
2.00 Watts |
 |
Standby |
0.25 Watts |
 |
Sleep |
0.10 Watts |
GreenPower Drives
GreenPower drives from WD deliver exceptional power conservation, run ultra-cool and quiet, while providing solid performance. The following technologies enable the WD RE2-GP platform:
* IntelliPower™ - A fine-tuned balance of spin speed, transfer rate, and caching algorithms designed to deliver both significant power savings and solid performance. Additionally, GreenPower drives consume less current during start up allowing more drives to spin up simultaneously resulting in faster system readiness.
* IntelliSeek™ - Calculates optimum seek speeds to lower power consumption, noise and vibration.
* IntelliPark™ - Delivers lower power consumption by automatically unloading recording heads during idle to reduce aerodynamic drag and by disabling read/write channel electronics.
* Active Power Management - WD GreenPower drives monitor work load and automatically invoke idle mode whenever possible to further reduce unnecessary power consumption. Drive recovery time from idle mode is less than one second, providing seamless communication between the drive and the host controller.
| Performance Specifications |
 |
Rotational Speed |
IntelliPower * |
 |
Buffer Size |
16 MB |
 |
| Seek Times |
 |
Read Seek Time |
8.9 ms |
 |
| Transfer Rates |
 |
Buffer To Host (Serial ATA) |
3 Gb/s (Max) |
 |
Transfer Rate (Buffer To Disk) |
84 MB/s (Sustained) |
 |
 |
| Physical Specifications |
 |
Formatted Capacity |
1,000,204 MB |
 |
Capacity |
1 TB |
 |
Interface |
SATA 3 Gb/s |
 |
User Sectors Per Drive |
1,953,525,168 |
 |
 |
| Physical Dimensions |
| English |
 |
Height |
1.028 Inches (Max) |
 |
Length |
5.787 Inches (Max) |
 |
Width |
4.00 Inches (+/- 0.010 inch) |
 |
Weight |
1.61 Pounds |
 |
| Metric |
 |
Height |
26.1 mm (Max) |
 |
Length |
147 mm (Max) |
 |
Width |
101.6 mm |
 |
Weight |
0.73 kg |
 |
 |
| Environmental Specifications |
| Shock |
 |
Operating Shock (Read) |
65G, 2 ms |
 |
Non-operating Shock |
250G, 2 ms |
 |
| Acoustics |
 |
Idle Mode |
24 dBA (average) |
 |
Seek Mode 0 |
29 dBA (average) |
 |
Seek Mode 3 |
25 dBA (average) |
 |
| Vibration |
 |
Operating |
 |
Linear |
20-300 Hz, 0.75 G (0 to peak) |
 |
Random |
0.004 g²/Hz (10 to 300 Hz) |
 |
 |
| Electrical Specifications |
| Current Requirements |
 |
12 VDC |
 |
Read/Write |
340 mA |
 |
Idle |
254 mA |
 |
Standby |
6 mA |
 |
Sleep |
6 mA |
 |
 |
5 VDC |
 |
Read/Write |
675 mA |
 |
Idle |
195 mA |
 |
Standby |
180 mA |
 |
Sleep |
180 mA |
 |
 |
Power Dissipation |
 |
Read/Write |
7.4 Watts |
 |
Idle |
4.0 Watts |
 |
Standby |
0.97 Watts |
 |
Sleep |
0.97 Watts |
Other Visitors Comments
There are no comments currently....
Comment on this article
|